18
Replacement Parts Illustrations and Parts Lists
AccuGlide™
II
STD 3 Inch Upper Taping Head, Type 39600
AccuGlide™
II
STD 3 Inch Lower Taping Head, Type 39600
1.
Refer to Taping Head Assemblies Figure, page 19 to find all the parts illustrations identified by figure
numbers.
2.
Refer to the figure or figures to determine the individual parts required and the parts reference number.
3 .
The replacement parts list, that follows each illustration, includes the part number and part description
for the parts in that illustration.
Note – The complete description has been included for standard fasteners and some commercially
available components. This has been done to allow obtaining these standard parts locally, should the
customer elect to do so.
4.
Refer to the first page of this instruction manual "Replacement Parts and Service Information" for
replacement parts ordering information.
IMPORTANT – Not all the parts listed are normally stocked items. Some parts or assemblies
shown are available only on a special order basis. Contact 3M/Tape Dispenser Parts to
confirm item availability.
Summary of Contents for AccuGlide II STD 3 Inch
