![background image](http://html1.mh-extra.com/html/3m/3m-matic-800rf/3m-matic-800rf_instructions-and-parts-list_442835057.webp)
45
Adjustments
(continued)
800rf-NA
2012 March
13.12 Box Drive Belt Tension
The two (2) continuously moving drive belts convey boxes through the tape applying mechanism.
The box drive belts are powered by an electric gear motor.
Tension adjustment of these belts may be required during normal operation. Belt tension must be adequate to
positively move the box through the machine and the belts should run fully on the surface of the pulleys at each
end of the frame. The idler pulleys on the infeed end are adjusted in or out to provide proper belt tension. Each
belt is adjusted separately.
Belt tension is obtained by tightening the adjustment screw so that a moderate pulling force of 3.5kg [7lbs.]
applied at the mid span, as shown in
Figure 13-14
, will de
fl
ect the belt 25mm [1 inch]. This will assure positive
contact between the belt and the drive pulley on the discharge end of the drive assembly.
Figure 13-14 Box Drive Belt Tension Adjustment
Discharge End
Infeed End
3.5kg (7lbs) Pull Force
with 25mm (1 inch) at Mid span
Box Drive Belt
13.13 Adjustment of the Upper Assembly
Descent
Brake
The brake adjustment must be done when the upper
group does not stay in position and tends to come
down further.
- Loosen the screw 1
- Turn the ring nut 2 clockwise
- Tighten the screw 1
Do this operation on both cylinders.
Figure 13-15
2
1
Summary of Contents for 3M-Matic 800rf
