28
2012 March
800rf-NA
9-OPERATION
(continued)
3
5
4
a)
b)
c)
d)
e)
f)
g)
9.4 Alarms
Warning light a:
Thermal switch activation
(motor
overload)
- The machine cannot be started; machine stops if
it is running
-
To restart press 3, after 4, then 5 push-buttons.
Warning light b: Time out cycle
(the machine will
stop when the cycle taping boxes is not done just
in time as preselected; 10 seconds approximately).
- machine
stop.
-
to restart press 4, 5 push-buttons; if necessary,
open a safety guard to eliminate a jam,
press 3, 4, 5 push-buttons.
Warning light c: Minimum gap between side belts
(box size below allowed minimum dimensions or
no
box)
- machine
stop.
-
to restart press 4, 5 push-buttons; if necessary,
open a safety guard to eliminate a jam,
press 3, 4, 5 push-buttons.
Warning light d: Emergency
(emergency push button pressed or safety
guard
opened).
-
machine stop, pneumatic circuit disconnected.
-
to restart press 3, 4, 5 push-buttons.
Warning light e: Full taping line
-
Temporary stop of the machine, the outside line
photocell is obscured; the cycle restart just
when the box is removed and so the above
mentioned photocell is reactivated.
Warning light f: Low air pressure
(min. 6 bar or no air)
-
the machine cannot be started, machine stops if it
is
running;
-
to restart press 4, 5 push-buttons
Warning light g: Tape end/breakage
-
the machine cannot be started, machine stops if
it is running;
-
to restart press 3, 4, 5 push-buttons
Figure 9-12
Summary of Contents for 3M-Matic 800rf
