Research & Development
tpr= 0:Transmitter parameters
are not reported
tpr=1:Transmitter parameters
are reported
idr= 0: ID Strings are not
reported
idr=1: ID Strings are reported
nsr= 0:Non-standard frames
are not reported
nsr= 1:Non-standard frames
are reported
+FIE=n Procedure
Interrupt parameter
n=0:Disable
n=1:Enable
+FPS=n
Page Transfer Status
n=1:Received page is good
n=2:Page is bad; retrain is
requested
n=3:Page is good; retrain is
requested n=4:Page is bad;
procedure interrupt is requested
n=5:Page is good; procedure
interrupt is requested
+FLO=n
Flow Control Select
n=0:No flow control
n=1:Sets XON/ XOFF software
flow control
n=2:Sets CTS/RTS hardware
flow control
+FPR=n
Serial Port Rate Control
n=0:Automatic DTE rate
detection by the DCE
n>0:Serial rate is fixed at the
value multiplied by 2400 bps
+FBO=n
Phase C Data Bit Order
n=0:Selects direct bit order
n=1:Selects reversed bit order
+FEA=n
Phase C Received EOL
alignment
n=0:EOL patterns are as
received
+FCR=n
Capability to Receive
n=0:Not receive message data
or poll a remote device
n=1: Receives message data or
poll a remote device
+FCQ=<rq>,<tq>
Copy Quality disable/enable
rq= 0:Receive copy quality check
is disable
rq=1:Receive copy quality check
is enable
tq= 0:Transmit copy quality
check is disable
tq=1:Transmit copy quality check
is enable
+FRQ=pql,cbl
Receive Quality Thresholds
pgl= 0-64h:Specifies the
percentage of good lines
cbl= 0-ffh:Specifies the
maximum tolerable number of
consecutive bad lines
+FAA=n
Adaptive Answer Mode
n=0:Answers as set by
+FCLASS
n=1:Answers and
auto-determines the call type
+FCT=n
Phase C Timeout
n=0-ffh,1 sec units
+FMS=n
Minimum Phase C Speed
n=0:2400 bps
n=1:4800 bps
n=2:7200 bps
n=3:9600 bps
n=4:12000 bps
n=5:14400 bps
+FBS? Buffer
Size 512,256
Page
24
of
24
Revision 1.0
2003/6 From 3JTech
