Assemble Panels
1. The Front Door
Each of the corners on the enclosure will be held together by the connectors pictured
below. There are only two versions L and R, which can be identified by the letters
stamped on the inside. The diagonally opposite connectors are identical, i.e. Bottom
Right is the same as Top Left. In all cases the surface of the connector with the cutout
pattern faces front or back. Note the two pictures below
show the inside of the front
panel.
If the holes don’t seem to line up please
https://www.3dupfitters.com/blogs/news/how-to-attach-corner-connectors
R-Connector From
Inside
Top Left (L)
Top Right (R)
Bottom Left (Labeled R)
Bottom Right (Labeled L)
Copyright 2020 3DUPfitters LLC
6
