7. Plugging Things In
There are a couple of things to plug in: the
Prusa itself and the fan. The old style silver
Power Supply Unit just plugs in through the
vent.
If, instead, you are using the newer black
power supply then the power cable goes
through the grommet in back.
We recommend getting a combination USB
power supply strip, available just about
anywhere. That way you can power both the
printer and accessories from the same strip,
AND turn everything o
ff
and on from outside the
enclosure.
8. Spool Holder
Instructions for assembling the spool holder are
available online. You can simply sit the spool
holder on the top of the enclosure where the
filament can fit into the slit. Of course, you are free
to use whatever type of freestanding spool holder
you wish; there are hundreds of designs available
on Thingiverse.
Copyright 2020 3DUPfitters LLC
13
