3DR H520-G, Flight Manual

Page: 17 / 36

17
2.2.7 INSPECTION CHECKLIST
Owner:
Date:
Unit Tested:
Serial Number:
☐ Firmware updated to current version
☐ Checked ST10C nuts and toggle mounts
☐ Motor shafts and propellers in good shape
☐ Battery slides in properly and locks in place
☐ Landing gear in good condition and properly extending/retracting
☐ Camera installed and in good condition
☐ Camera rails in good condition
☐ Frame inspected for structural damage
☐ Full transmitter system check
☐ Battery cells balance normal (if included)
☐ LED Indicators checked
☐ Telemetry data accurate and functioning
☐ Startup sequence normal
☐ Accelerometer test complete
☐ Compass calibration checked
☐ GPS signal locked and acquired sufficient satellites
☐ Stationary hover test completed
☐ Range tested and within specs
☐ Max altitude tested and within specs
☐ Picture tested at altitude
☐ Camera tested for functionality and quality
☐ Tested manual/no GPS flight response
☐ Tested waypoint/survey functions
☐ Tested RTL and auto-landing
☐ GPS locked throughout flight
☐ Motors and battery tested for normal temperature
☐ Video/picture examined for any discrepancies
☐ Product cleaned
Maintenance by:
Date: