3DR H520-G, Flight Manual

Page: 22 / 36

22
3.3 PAIRING
3.3.1 Pair RC with Aircraft
1. Power up the ST10C controller and connect it to the iPad via Lightning cable
2. Power up the H520-G aircraft
3. Open up the Site Scan App, login and select any Project
4. Select the H520-G aircraft in the Site Scan App. Telemetry status will show “Connecting”
5. Access the pairing menu go to: Global Settings → Aircraft Settings → Remote Controller Pairing
6. Tap Pair with Aircraft
7. Follow the instructions on the screen to pair the vehicle, camera pairing should begin after a
successful vehicle pairing
8. If pairing process is successful, the blue light on the front of the controller will stop blinking after a
few seconds and become solid blue
3.3.2 Pair RC with Camera
1. Power up the ST10C controller and connect it to the iPad via Lightning cable
2. Power up the H520-G aircraft
3. Open up the Site Scan App, login and select any Project
4. Select the H520-G aircraft in the Site Scan App. Telemetry status will show “Connecting”
5. Access the pairing menu go to: Global Settings → Aircraft Settings → Remote Controller Pairing
6. Tap Pair with Camera
7. Select the WiFi network being transmitted by the aircraft camera (the MAC address is marked on
the camera mount “MAC:xxxxxxxxxxxx”) and connect to it by entering the password. The default
password will automatically be typed in: 1234567890. To test if the aircraft is paired, try to pitch the
camera. If it moves, it means that the aircraft is connected
8. If pairing process is successful, the blue light on the front of the controller will stop blinking after a
few seconds and become solid blue, the light on the camera will be solid green