User Manual
FireCR Flash
TM-401-EN
24
4.3. Operating Instructions
4.3.1. Turn on the Reader
Turn on the reader. Power switch is on the rear side of the reader.
4.3.2. Turn on the Computer
Turn on the computer.
Acquisition and Diagnostic Software must be installed before operate
the reader.
4.3.3. Cassette Insert and Eject
Insert the cassette to the entrance of the reader and push gently until it reaches to the
protection wall inside of the reader. Green indication LED is on when the cassette is inserted
correctly. Insertion direction of the cassette must be parallel to the reader.
Cassette can be ejected when scanning and erasing are completed. Gently pull back the
cassette and ejection direction of the cassette must be parallel to the reader.
4.3.4. Getting a Scanned Image
To getting a scanned image, refer to Acquisition and Diagnostic Software manual.
D
ANGER
This device uses laser. Avoid looking inside of the scanner.
W
ARNING
Do not insert the cassette in wrong direction or upside down when
it is being inserted. Cassette insertion direction is marked on the
cassette.
