3Disc FireCR Flash User Manual Download Page 136

Page: 136 / 167

User Manual

QuantorMed Plus

TM -721-EN

Figure 9.1. Task List

①

Study Bar: Displays study date, study time, and study description. Only time is

displayed for studies conducted on the same day. Only dates are displayed for studies

conducted on any prior dates.

②

Task Bar: Displays thumbnail images, body part, and view position.

③

Select all: Select all the tasks.

④

Add Preset: Add the selected study to the preset. When added to the preset, the added

study will be displayed on the Preset List in the Region Selection screen.

⑤

Delete: Delete selected tasks.

⑥

Edit: Show/hide Move and Switch buttons.

⑦

Send Study: Transmit the selected study. Destination of the transmission can be added

in Settings.

⑧

Print: Print the selected images using a DICOM printer or a Windows printer.

⑨

Stitch: Used to stitch multiple images into one when long bones are scanned. To stitch

images, all the images must have the identical scan resolution. Images scanned in SD

resolution and in HD resolution cannot be stitched. Up to three images can be stitched

into one.

⑩

Move: Change the order of the tasks. Change the order of the task by pressing the

Up/Down buttons.

①

②

③

⑦

⑧

⑨

⑩

⑪

⑫

④

⑤

⑥

Summary of Contents for FireCR Flash








































































































































































Search results

Summary of Contents for FireCR Flash

Reviews:

3Disc FireCR Flash, User Manual, Page: 136 / 167

Search results

Summary of Contents for FireCR Flash

Reviews: