www.modellmarkt24.ch
25
36.
Attach a 36 inch EF 20 awg servo extension to each elevator servo lead. If you
plan to remove the stabs for transport, you will need to use 48 inch extensions.
Secure with EF Servo Safety Clips or heat shrink tubing. Slide the stab halves onto
the carbon fiber stab tube and secure with a 3mm bolt and washer inserted through
the mounting tabs and into the pre-mounted blind nuts. Make sure to use a drop of
blue Loctite on these bolts.
37. The wings are mounted on the provided carbon fiber wing tube and retained by
inserting a 3mm bolt and washer through the two tabs that protrude from each wing
root and into the corresponding blind nuts that are mounted in the fuselage
structure. Be careful not to cross thread the bolts. Also, included with your Extra
330E is a set of side force generators (SFGs) and racing tips. They are secured to
each wingtip with 3mm bolts inserted into pre-installed blind nuts in each wing tip.
38. The canopy is retained by 2 spring loaded latches. Make sure both latches are
completely engaged before taking off!
www.modellmarkt24.ch
