www.modellmarkt24.ch
21
There is a plywood jig included in the hardware package to help properly align the
dual control horns if using a pull-pull setup. This makes achieving correct alignment
a breeze.
29. Once your control horn installation has cured, mount the rudder to the fuselage
using the same process as you did when gluing on the ailerons and elevators.
30. Locate the 2mm ball link from the tailwheel hardware bag. Drill a hole to accept
the shaft of the ball link and secure it with epoxy. Once dry mount the tailwheel
assembly as shown.
www.modellmarkt24.ch
