Install receiver into fuselage, we mount it under the fuselage top hatch for easy access. Install receiver
battery on fuel tank tray as needed for CG adjustment. If additional weight is needed for CG location, we
recommend the use of modeling clay inside the motor box.
Install a 18-21" diameter propeller as appropriate for your power system.
Control Setup
Control throws – High Rate
Ailerons – 30 degrees
Elevator – 30 degrees
Rudder – Maximum throw available without interference
* High rate exponential typically 55-75%
Control throws - Low Rate
Ailerons – 15 degrees
Elevator – 15 degrees
Rudder – 18 degrees
* Low rate exponential typically 35-50%
Flap throws – three position: 0 degrees, 45 degrees and 75-80 degrees