Pannoramic SCAN 150 1.17 User’s Guide
4 Software Description
Toolbar for live images
The toolbar is only available for the displayed live image, but not available for camera
images during digitization.
•
– Zoom in
•
– Zoom out
•
– One pixel on the monitor corresponds to one pixel on the camera
•
– The live image completely fills the display area
•
– Displays or hides the vertical and horizontal scale bars
•
– Displays the magnifier window
•
– Activates red marking on overexposed pixels
•
– Recalculates exposure time (useful if too many overexposed pixels were
detected)
•
– Calculates white balance (only for color cameras)
•
– Saves the current image as BMP or JPEG file
•
Fast live mode –
live images are displayed with a frequency of at least 10
images/second. If an exposure time is set to more than 100 ms, the pixel values are
multiplied accordingly (for example, if an exposure time of 200 ms is set, the pixel
values are multiplied by 2, and the exposure time is reset to 100 ms). Therefore the
resulting images will have a higher noise level.
This function is useful for fluorescent scanning where in spite of the higher noise
level, the resulting image will refresh like in normal mode.
•
Normal live mode –
images are taken with the user-specified exposure time
Status bar
•
Current position of the cursor related to the live image
•
RGB value of current pixel
•
Zoom level of the current live image
July 4, 2013 - Rev. 1
3DHISTECH Ltd.
61(130)
