Pannoramic 250 1.15 User’s Guide
4 Software Description
The Routine work tab panel provides the following basic digitization functions:
To insert and remove slides
•
To move the lowest magazine in the input stack to the loading position click
.
•
To move the magazine into the output stack, click
.
•
To move a selected slide from its magazine to the specimen holder either enter its position
number to the
Current slide
field and click
.
•
To return the slide to its magazine, click
.
•
To move all magazines to the output stack, click
.
•
To access the
Scan Options
window, click
.
Note:
These settings are only applicable if you do not use profiles. If you use
profiles, the profile settings are used.
Scanning Mode
•
Full automatic
: focus and exposure time are automatically determined by the software
•
User controlled
: you can define focus and exposure time manually.
The selection of scanning mode influences the number of options on the Focus
tab panel.
To administer profiles, use the
Scan Profiles
field.
•
The current profile name is displayed at the bottom left corner of the screen.
•
To save the current profile, click
Save
.
•
To select an existing profile from the selection menu, click
Load
.
•
You can delete the current profile by clicking
Delete
.
March 13, 2012 – Rev. 1
3DHISTECH Ltd.
80
(
135
)
