3devo GP20 Hybrid, User Manual

Page: 86 / 92

82
VFD – not found No valid response from
the VFD motor
controller received. Make sure the latest
firmware is installed or
contact the manufacturer to
resolve this situation. Check
support.3devo.com .
VFD – not supported
model
Unsupported VFD
motor controller model
detected. Make sure the latest
firmware is installed or
contact the manufacturer to
resolve this situation.
Check
support.3devo.com .
Error has occurred The external supply
voltage is too low or
absent. First check if the voltage of
the machine matches your
power outlet. This issue
usually happens if a USB
cable is plugged in, but the
machine is off, or the power
plug is not plugged in.
Please check these last
points.
Error has occurred VFD motor current limit
reached. Either too much material
was being fed, or the
material is too thick/strong.
Decrease the amount of
material being fed or
decrease the size of the
parts.
Error has occurred Motor obstruction
retries maximum
reached. The motor is obstructed too
much in a short period. The
material might be too
big/tough or feed in lesser
quantities.
Error has occurred Thermistor is not
connected. Contact us via
support.3devo.com .
Error has occurred Motor too hot. This might happen if the
machine is running for an
extended amount of time, in
a warm environment. If it
happens very often, please