3devo GP20 Hybrid, User Manual

Page: 47 / 92

43
⚠
WARNING
Make sure the machine is turned off and the power plug is removed before
proceeding with the next steps!
Step 2) Remove the Hopper from the machine
Step 3) Remove the Container from the machine
⚠
WARNING
Always wear cut resistant gloves when working around and inside the cutting chamber.
Step 4) Open the granulator door to gain access to the cutting chamber
Step 5) Remove filter screen. More information about this can be found
in chapter 3.5.3.2
Step 6) Optional: for thorough cleaning, also remove the Rotor. More
information about this can be found in chapter 3.5.3.3
Step 7) Clean the cutting chamber using the following tools:
Step 8) Vacuum cleaner
Step 9) Pressurized air
Step 10) Brush
Step 11) Screwdriver,
Step 12) Tweezer (or similar object)
Step 13) Finally clean the granulator compartment and reinstall the filter.