28
3dscentral.3dsystems.com
Notices
Copyright and Trademarks
Copyright © 3D Systems, Inc. 1995-2012. All rights reserved.
The information in this document may not be duplicated or
transmitted in any way without the express written consent of
3D Systems, Inc. The information contained herein is for the use
of 3D Systems, Inc. customers, who are permitted to create
brief excerpts for the purposes of training and review. This infor-
mation may not be incorporated in any commercial programs,
books, databases, or in any kind of software without the consent
of 3D Systems, Inc.
Z, 3D Systems, zp, zb, ZPrinter, ZCast, ZScanner, ZScan and the
3D Systems logo and design are pending/registered trademarks
of 3D Systems.
ZPrint® 7.15 System Software Copyright (c) 1996-2012 3D Sys-
tems, Inc.This software is based in part on the work of the Inde-
pendent JPEG Group.
PNG library libpng version 1.2.2 Copyright (c) 1998-2002 Glenn
Randers-Pehrson, (Version 0.96 Copyright (c) 1996, 1997
Andreas Dilger), (Version 0.88 Copyright (c) 1995, 1996 Guy
Eric Schalnat, Group 42, Inc.)
ZLIB general purpose compression library version 1.1.4, Copy-
right (C) 1995-2002 Jean-loup Gailly and Mark Adler.
Microsoft Windows is a trademark of Microsoft Corporation.
3D Systems acknowledges the trademarks of other organizations
for their respective products or services mentioned in this docu-
mentation.
Proprietary Information
Information contained in this document is the confidential prop-
erty of 3D Systems. Recipient shall not disclose such Information
to any third party, and shall not use it for any purpose whatso-
ever other than what is required to install and use this ZPrinter®
system.
Use of Equipment
3D Systems' Equipment, and use of the Equipment, may be sub-
ject to limitations imposed under patents licensed to or owned
by 3D Systems, and is to be used solely for the fabrication of
appearance models and prototypes using new 3D Systems-sup-
plied consumables from 3D Systems or its authorized distribu-
tors in the original packaging. Other uses may be restricted;
contact 3D Systems for further information. Consult the User's
Manual before operation of any 3D Systems Equipment.
The Equipment is designed to be used by design engineers and
other professionals in the production of early-stage 3D appear-
ance models and prototypes. The Equipment is not to be used to
produce, either directly or indirectly, medical or other products
that may require precise dimensions or tolerances to ensure the
