3dscentral.3dsystems.com
19
Follow the steps below to set up the Post-Processing Unit for
infiltration.
WARNING
The Post-Processing Unit is for use with Z-Bond only.
Do not use with any other Infiltrant. Do not use with
spray paint of any kind, or with any flammable spray.
1.
Pull down the Accessory
Tray Arm.
2.Slide the Accessory Tray onto
the Arm.
3.Place the part on the Accessory
Tray.
4.
Unlatch the metal tray from inside the top of the Post-Pro-
cessing Unit.
5.
Lower the metal tray to the
bottom of the Post-Pro-
cessing Unit and press
down to snap it in place.
6.
Turn on the carbon air filter to capture any fumes from the
infiltration. On the LCD Menu, select
POST PROCESS
MENU
, then
POST PROCESS FILTER
and
TURN
ON
.
