3D Systems Sinterstation Pro, User Manual, Page: 231 / 280

SLS p r o c e s s 2 3 1 B O S
u s e r ’ s g u i d e u s i n g t h e B O S s e t u p m e n u
To access the Eng Params menu
Use the Eng Params menu to view and change
the BOS MaxTimeTransLoad ,
MaxTimeStopLVFlow , and MaxTimeConveying
engineering parameters.
From the Setup menu, choose Eng Params , then
press .
The Eng Params menu appears.
L
If you see an Access Denied display at this
point, you are not authorized to change BOS
engineering parameters. Press
to return to
the Setup menu and contact 3D Systems
Customer Support for assistance.
Press to choose the engineering
parameter you want to set, then press .
SET MAXTIME PARAMETERS
Use the MaxTime[ operation_name ] engineering
parameters to set the timeouts for various BOS
powder transfer operations.
1
From the Eng Params menu, choose a
MaxTime[ operation_name ] parameter, then
press .
The current value of the
MaxTime[ operation_name ] parameter
appears; for example, 1000 for
MaxTimeStopLVFlow .
2
Use to increase or decrease the
MaxTime[ operation_name ] timeout setting.
3
Press to save the timeout setting, or press
to keep the setting as-is and return to the
Process Params menu.
BOS engineering parameters should
only be changed by 3D Systems
certified service personnel.
Eng Params
>MaxTimeTransLoad
MaxTimeStopLVFlow
MaxTimeConveying
Eng Params menu display
Insert note or caution. what
happens if set the
MaxTime[ operation_name ]
wrong?
MaxTimeStopLVFlow
1000
MaxTimeStopLVFlow display