5
3D Systems, Inc.
7
SAFETY INFORMATION
UV RADIATION HAZARD: Invisible UV radiation is accessible in the vicinity of this sign or behind the panel.
Radiation can cause eye injury or blindness, burn injury and/or fi re. Access panels are for service only and should
be opened only by certifi ed service personnel.
ELECTRICAL SHOCK HAZARD: High voltage electricity is accessible in the vicinity of this sign or behind the access
panel. High voltage can cause severe burns or death, as well as fi res. Access panels are for service only and should
be opened only by certifi ed service personnel or trained maintenance personnel.
HOT SURFACE HAZARD: A hot surface is accessible in the vicinity of this sign or behind the access panel. Avoid
contact. Hot surfaces can cause burn injury or fi re. Allow surface to cool before touching. Access panels are for
service only and should be opened only by certifi ed service personnel or trained maintenance personnel.
HARMFUL IRRITANT WARNING: Indicates that skin or eye irritation could result while exposed to a chemical
composition.
CAUTION: Indicates the possibility of loss of data or damage to equipment.
WARNING: Indicates the possibility of injury or death to personnel.
WEAR GLOVES: when handling certain materials or touching surfaces that may contain the materials.
ULTRAVIOLET RADIATION INSIDE: Exposure may cause eye damage. Do not operate without covers. Wear UV eye
protection.
SAFETY SYMBOLS AND DEFINITIONS
EMERGENCY DISCONNECT DEVICE
The power cord is classifi ed as the emergency disconnect device for this 3D printer
system.
A 36 inch distance of unobstructed access behind the printer is
required
. In an emergency situation, the user must have unobstructed access to
the power cord.
The adjacent label is located on the E-chassis of the 3D printer system.
