Returning the Advance Preparation Checklist?
Return the completed checklist via the method chosen below:
Fax to the Account Representative's fax number (above):
Fax to the _________________________________________
office fax number (see above)
Fax or mail to: _____________________________________
ACCOUNT REPRESENTATIVES Place Business Card here and
staple to document.
STAPLE CARD HERE
12.0 Printer Advance Preparation Checklist
NOTE: Unless governed by prior arrangement, 3D Systems is not responsible for loading the Projet™ client software on
the user's workstation(s). Thus, BEFORE THE PRINTER ARRIVES, ensure that your workstation is capable of supporting
the requirements of both the client software and communication with the machine via your network.
Review this list with a network administrator, IT department, facilities manager or other responsible person within your organization. Complete and
place a check mark next to each item. Once everything is complete, photocopy this page, and fax it to the number checked or provided on the
bottom of the inside back cover of this document. If no number is provided or relevant, then fax to +1 970-257-4601 (U.S.A).
Please complete the following (if making a copy to fill in, please print):
Company Name: _____________________________________________________________
Contact (Print full name): ______________________________________________________
Date faxed: _________________________________________________________________
Telephone (with area code): ____________________________________________________
Email: _____________________________________________________________________
Please place a check in each box once that item is complete.
Check
Box
Final installation site selected. The intended physical location for each ProJet™ Production Printing System(s) should be selected in
advance, and checked for adherence to the guidelines set out in this guide.
If required by the shipper, a method of removing the crate from the shipper's truck has been arranged (forklift is required) and is
available to transfer the crate(s) to the decrating location.
NETWORK CONNECTION IS INSTALLED. An RJ45 (UTP, female connection jack) Ethernet network connection for EACH printer
that is to be installed at the delivery site must be installed, tested and functioning.
Operating system and workstation configurations are compatible and meet the minimum requirements as stated in the "Client
Workstation Requirements" section.
TCP/IP is installed and enabled.
Static IP address(es) has/have been allocated for each printer ordered. A permanent IP address on the network is assigned
(presumably by a Network Administrator) to each printer that is to be connected to the network. Write IP address here:
____________________________
Test each IP address by pinging it, or by temporarily connecting a network resource (such as a workstation or a Printer) and "pinging"
from another workstation on the network.
Dedicated line, with a surge-and-spike-protected electrical power circuit for each printer, meeting one of the following specifications
(Place check mark beside the appropriate specification:
____ 115 VAC, 50/60 Hz (dedicated 20 amp breaker)
____ 230 VAC 50/60 Hz (dedicated 15 amp breaker)
Provide uninterruptible power (active battery back-up)
Summary of Contents for ProJet 5000
Page 5: ......
