One licensed copy of 3D Systems ProJet® Client Software with integrated online Help and Quick Reference Guide
Region-specific ProJet™ Production Printing System "country kit" consisting of:
One power cable kit for of a country-appropriate power, and a voltage warning document
One pack of nitrile gloves
One box of drip pans
05.0 Facility Guidelines
This section provides detail relating to site selection, site preparation and readiness of the facility to accept and install the ProJet™ Production
Printing System.
Discuss the appropriate equipment locations with a 3D Systems' representative, so that the equipment is located in a convenient, appropriate
location based on your organization's needs. When planning an installation, consider:
05.1 Space Planning
05.2 Access Area Surrounding Printers
05.3 Unit Portability
05.4 Electrical
05.5 Client Workstation Requirements
05.6 Network Interface
05.7 Material Storage
05.8 Material Bottle Disposal
05.9 Weights and Measures
05.1 Space Planning
Below is a suggested floor plan for a ProJet™ Production Printing System installation. Each printer requires use of a dedicated circuit. Multiple
printers CAN NOT be located on a single circuit. An additional 110 or 220 VAC outlet is recommended for service needs. A phone near the printer
is recommended to facilitate machine support. Each location of the machine requires a standard wall power outlet or power drop to power printer.
The outlet location must be near the printer and remain accessible to the end user at all times.
*NOTE: The ProJet Finisher XL has to be hard-wired in the facility. Ensure a certified electrician is required for installation.
A freezer is required for cooling parts after builds. The size of the freezer must be able to accommodate the build platform's size of 22 (L) x
16.25(W).
Dimensions
(WxDxH)
Crated:
1828 x 1155 x 1981mm (72 x 45.5 x 78 inches)
Uncrated:
1531 x 908 x 1450mm (60.3 x 35.7 x 57.1 inches)
NOTE: The printer MUST be placed on a vibration free concrete floor. Do not install on any other floor covering such as
vinyl, tile, carpeting, etc.. Doing so WILL affect machine performance.
NOTE: The ProJet™ Production Printing System is not designed to connect to an IT system.
Summary of Contents for ProJet 5000
Page 5: ......
