8
40-D043 Revision C 5-May-17
Table 1, shown below, lists the required build envelopes that represent all RDM and platform
elevator configurations that the iPro 8000/9000 SLA Center supports. Each RDM and platform
elevator design minimizes the amount of resin that the iPro 8000/9000 SLA Center requires.
Table 1: RDM Configurations
Name
Maximum Build Volume
Fill Capacity
RDM 650M
650 x 350 x 300 mm (25.6 x 13.7 x 11.8 in)
148 liters (39.1 U.S. gal)
RDM 750SH
650 x 750 x 50 mm (25.6 x 29.5 x 1.97 in)
95 liters (25.1 U.S. gal)
RDM 750H
650 x 750 x 275 mm (25.6 x 29.5 x 10.8 in)
272 liters (71.86 U.S. gal)
RDM 750F
650 x 750 x 550 mm (25.6 x 29.5 x 21.65 in)
414 liters (109.3 U.S. gal)
RDM iPro 9000 XL
1500 x 750 x 550 mm (59 x 29.5 x 21.7 in)
935 liters (247 U.S. gal)
The iPro 9000 XL builds large, single-piece parts up to 60-inches long
with all of the performance attributes and accuracy that users have
come to expect from 3D Systems' high-definition Stereolithography
process. This system delivers extra-large parts with no seams for
aesthetic superiority, one-piece durability, resulting in reduced labor and
decreased cost. This RDM is only available for use in the iPro 9000
SLA Center.