71
40-D043 Revision C 5-May-17
Options
Options
enables you to select or deselect the machine options for the
build.
Checking
the boxes selects the following options:
Skip Init:
Skips the initial operations of the build, including coarse resin
leveling and proper elevator positioning.
Recoating:
Recoats during the build.
Profiling:
Profiles beam and determines drawing speed during the
build.
Drawing:
Draws, or solidifies, the polymer to create the part during the
build.
Drift:
Performs the drift correction during the Drawing (see previous
entry).
Leveling:
Checks and resets, if necessary, the resin level to the
appropriate build level.
Sensor Log:
Writes the sensor information into a file.
Build Log:
Writes the build information into a file.
Abort Build On Profiled Beam Width Error:
Allows the build to abort if
the beam width measurement is not within system specifications.
DP:
Enables you to display and to change the current value of the
resin
’
s penetration depth.
EC:
Enables you to display and to change the current value of the
resin’s critical exposure.