3D Systems iPro 8000 SLA Center User Manual Download Page 51

Page: 51 / 125

www.3dsystems.com

40-D043 Revision C 5-May-17

User’s Manual

8000/9000

T o o l B a r

Tool Bar

Status:

Shows machine status.

Queue:

Lists the build jobs in the queue.

Open:

Browse for a new build file; prompts you to clear the current file if one is currently open.

Play:

Starts the build.

Pause:

Pauses the build.

Stop:

Clicking this button prompts for confirmation to stop; when

okay

is selected, the machine will

stop at the end of the current function (drawing or recoating).

Restart:

Enables the build to continue from where it was stopped.

Preview:

Enables a display of the build on the screen.

Manual:

Opens the manual operations window; see

Manual Operations

Scanner:

Opens the scanner operations window; see

Scanner

History:

Gives access to information on previous builds.

Software Overview

Summary of Contents for iPro 8000 SLA Center






























































































































Search results

Summary of Contents for iPro 8000 SLA Center

Reviews:

3D Systems iPro 8000 SLA Center, User Manual, Page: 51 / 125

Search results

Summary of Contents for iPro 8000 SLA Center

Reviews: