58
40-D043 Revision C 5-May-17
M a n u a l O p e r a t i o n s
Action:
Describes the current recoater action.
Status:
Displays if the recoater has been reset by sending it to its
Home
location.
Note: These values apply only to manual movement.
Home:
Moves the recoater motion axes to their home positions and redefines the home position
(relative zero position of the recoater).
Velocity:
Specifies the recoater speed, in inches or millimeters per second, during manual motion;
it does not affect motion during the move.
End:
Moves the recoater to its rear limit.
Remove Bubbles:
Runs a pre-defined operation to remove bubbles on
the resin surface.
Calibrate Recoater:
Runs a pre-defined operation to calibrate the recoater
system.
Vacuum:
Check Box that allows the user to turn on/off the ZephyrTM
recoater
’
s vacuum.
Move:
Manually
moves recoater as the user specifies.
Distance:
Specifies distance, in inches or millimeters, from
current position; negative moves recoater toward the front of
the machine, positive moves recoater toward the rear of the
machine.