3D Systems, Inc.
29
9
APPENDIX F: GEOMAGIC TOUCH RE-PACKAGING INSTRUCTIONS
If you need to transport or ship the device, please follow these packaging guidelines to reduce the risk of damage to the device.
IMPORTANT
Remember the Geomagic Touch device is a sensitive piece of electronic equipment and must be handled with care. Lifting the device
by any of the moving parts may adversely affect the unit’s performance and risks damaging the device. The Geomagic Touch device
has a limited range of motion. Forcing the device past these limits risks damaging the device. If you have not already done so, please
review
“PROPER HANDLING AND POSITIONING OF THE GEOMAGIC TOUCH DEVICE” on page 10
.
SHIPPING CHECKLIST / PACKING MATERIALS:
You will need the following items to ship the device safely.
The packaging materials in which the device was originally shipped:
•
1 Medium shipping box
•
1 Set of foam inserts (cradles the device)
•
Shipping Tray
•
Packing tape
PACKING THE DEVICE AND ACCESSORIES
•
If necessary, reassemble the box and arrange the foam inserts.
-
Fit the bottom foam insert into the bottom of the box.
•
Orient the Geomagic Touch device to fit neatly inside the foam insert. You may need to grasp the Geomagic Touch device by the upper
arm—the piece with the oblong cutout— in order to position it properly. DO NOT grab the stylus.
•
Gently lower the Geomagic Touch device into the insert, while maintaining alignment of the Geomagic Touch arm to the cutout.
•
Ensure that the Geomagic Touch device is fully seated by pressing firmly on the Geomagic Touch label.
•
Check to see that the Geomagic Touch arm is fully seated by carefully pressing on the elbow joint.
•
Place the top half of foam insert over the Geomagic Touch device.
•
Place the stylus, power supply, power cord, and Ethernet cable into the Shipping Tray on the top of the foam insert.
•
Place the Shipping Tray over the foam insert.
•
Close the box and tape shut.
F
