3D Systems, Inc.
11
Storing the stylus:
After the device is calibrated, the stylus may be kept in the inkwell or left resting on the desk. Keep in mind that
storing the stylus in the inkwell increases the risk that the device will be knocked over or that the stylus will be damaged.
Stylus does not need to be stored in the inkwell.
Protecting the device from damage:
It is best to place the unit firmly on the desktop and away from edges to reduce the risk of
damage to the device from a direct, unintentional elbow hit. The stylus is particularly vulnerable to sustaining damage when it is in the
inkwell.
To reduce the risk of damage, keep the device out of harms way. Pay extra attention if the stylus is stored in the inkwell.
Reassembling the detachable stylus:
The stylus is detachable by design. Reassemble it by aligning the blade on the shaft with the
slot in the stylus and inserting it till it snaps in place as shown in the image below.
Align the blade and shaft to reassemble the stylus.
