3D Platform
WorkSeries 200, 300 & 400 Manual
Revision: B
Date: December 28, 2017
3dplatform.com
• 3DP
-DOC-005 (12-2017)
17
Printer Operation
Heating the Extruders & Print Bed
Active Temperature
From the Touch Screen
1.
On the touch screen, select the Active button for
EXT1.
2.
Using the different levels, increase or decrease the
temperature as necessary.
3.
Push the Set button.
4.
Then click on the EXT1 symbol. This will activate the
heater and the temperature reading will turn red.
From the Web Interface
1.
Once navigated to
your printer’s web interface,
select the drop-down menu for the extruder that
you would like to set.
Note:
You may also type in a temperature if the drop-down menu does
not have the temperature you wish to select.
2.
Once the drop-down menu shows the temperature
you wish to use, click on “Heater 1.”
3.
Heater 1 should then say “active (T0).”
Note:
Repeat either option for the secondary extruder or the print bed.
Standby Temperature
The standby temperature is used during a dual
extrusion print, and allows the second extruder to
remain heated to a temperature that will not drip when
not in use. The temperature setting process is like that
of the active temperature.
From the Touch Screen
1.
On the touch screen, select the Standby button for
EXT1.
2.
Using the different levels, increase or decrease the
temperature as necessary.
3.
Push the set button.
4.
Then click on the EXT1 symbol. Pushing the EXT1
symbol multiple times will cycle through the
Active/Standby states. Red is Active, Yellow is
Standby.
From the Web Interface
1.
Once navigated to your printer’s web interface,
select the Standby drop-down menu for the
extruder that you would like to set.
Note:
You may also type in a temperature if the drop-down menu does
not have the temperature you wish to select.
2.
The Standby temperature should now show your
selection.
3.
Click on “
Heater 1
”. This will cycle through the
Active and Standby temperature. It will show
“standby (T0)” under Heater 1.
Note:
Repeat either option for the secondary extruder or the print bed.
Symbol
Function
Nozzle 1 Heater
Nozzle 2 Heater
Bed Heater
