Here is an example layout of the throttle and fuel line setup. WARNING: make sure that
the fuel line cannot come into contact with the muffler. In the picture above, we used
flame retardant heat shrink over the tubing just in case it would ever touch the muffler.
Next attach the bottom half of the cowling using the included #4-40 screws and washers.
Note: We also highly recommend baffles to direct airflow over large electric motors and
twin cylinder gas engines. Below is an example of what this baffling may look like. We
recommend using balsa, or Depron foam.
Here is an example manual choke setup using a spare pushrod.