background image

C

E

ND

 U

SER

 S

OFTWARE

 L

ICENSE

 

A

GREEMENT

IMPORTANT:  READ BEFORE YOU DOWNLOAD, INSTALL, OR USE 

THIS SOFTWARE

3COM END USER SOFTWARE LICENSE AGREEMENT

YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND 
CONDITIONS BEFORE DOWNLOADING, INSTALLING AND/OR 
USING THIS SOFTWARE, THE USE OF WHICH IS LICENSED BY 
3COM CORPORATION (“3COM”) TO ITS CUSTOMERS FOR THEIR 
USE ONLY AS SET FORTH BELOW. DOWNLOADING, INSTALLING 
OR OTHERWISE USING ANY PART OF THIS SOFTWARE OR 
DOCUMENTATION INDICATES THAT YOU ACCEPT THESE TERMS 
AND CONDITIONS.  IF YOU DO NOT AGREE TO THE TERMS AND 
CONDITIONS OF THIS AGREEMENT, DO NOT DOWNLOAD, INSTALL 
OR OTHERWISE USE THE SOFTWARE OR DOCUMENTATION, DO 
NOT CLICK ON THE "I AGREE" OR SIMILAR BUTTON. AND IF YOU 
HAVE RECEIVED THIS SOFTWARE AND DOCUMENTATION ON 
PHYSICAL MEDIA, PROMPTLY RETURN THE ENTIRE PRODUCT 
WITH THIS SOFTWARE AND DOCUMENTATION UNUSED TO THE 
SUPPLIER WHERE YOU OBTAINED IT.

IN THE EVENT THAT A SYSTEM INTEGRATOR, CONSULTANT, 
CONTRACTOR, OR OTHER PARTY DOWNLOADS THE SOFTWARE 
FOR YOU, AND/OR USES OR INSTALLS THE SOFTWARE OR 
DOCUMENTATION ON YOUR BEHALF PRIOR TO YOUR USE OF THE 
SOFTWARE OR DOCUMENTATION, SUCH SYSTEM INTEGRATOR, 
CONSULTANT, CONTRACTOR, OR OTHER PARTY WILL BE 
DEEMED TO BE YOUR AGENT ACTING ON YOUR BEHALF AND YOU 
WILL BE DEEMED TO HAVE ACCEPTED ALL OF THE TERMS AND 
CONDITIONS OF THIS AGREEMENT AS IF YOU HAD DOWNLOADED, 
INSTALLED, OR USED THE SOFTWARE OR DOCUMENTATION.

Summary of Contents for WL-550





























































































































Reviews: