3Com WL-550, User Manual

Page: 56 / 124

54 C
HAPTER
5: C
ONFIGURING THE
R
OUTER
Access Control
This feature is used to filter the clients based on their MAC addresses.
Check the Enable MAC Address Filtering checkbox on the Access Control
screen.
Figure 37 Access Control Screen
There are two options available in the Access rule for registered MAC
address field:
■
if you click Allow , this means only the MAC addresses registered here
in the list will be allowed to access the Router via wireless link.
■
if you click Deny, this means the registered MAC addresses will not be
able to access the Router via wireless link.
Use the MAC Address Filtering List to quickly copy the MAC addresses of
the current wireless clients into the list table. You can define up to 32
MAC addresses to the list.
You can click Clear to delete the current entry in the list.