3Com V7000, Telephone Manual

Page: 41 / 84

Programmable Access Buttons 41
10 Do Not Disturb — Enables the Do Not Disturb feature. See Activating
Do Not Disturb .
11 Headset — Enables the use of a headset connected to the telephone.
See Using a Headset (3102 phone only) .
Feature Codes The Feature Button enables you to access features by pressing the
Feature button and then pressing a code on the telephone keypad.
Table 8 lists the feature codes on the 3102 Business Telephone.
You can access most of the features in Table 8 by pressing a programmed
access button on the 3102 Business Telephone; the features that do not
have a programmed access button have an asterisk (*).
Table 8 Feature Codes
Code Description
31 Displays and dials the first speed dial number.
32 Displays and dials the second speed dial number.
33 Displays and dials the third speed dial number.
34 Display and dials the fourth speed dial number.
100 Enables or disables the Hands Free feature.
101 Displays OK in the Display Panel. Use this function to make a call.
102 or 103 Displays the volume setting for the current mode:
■
If the handset is in the cradle and the speaker is disabled,
displays the ring volume setting.
■
If the speaker is enabled, displays the speaker volume setting.
■
If the handset is not in the cradle and the speaker is disabled,
displays the handset volume setting.
104 Enables or disables the speaker.
105* Enables or disables alphanumeric mode (required to dial a URL).
111 Acts as a Release button and cancels the current operation; use this
feature code to hang up, release a call, or exit the Program menu.
200* Displays the phone’s IP address.
201* Displays the Gateway IP address.
202* Displays the Subnet Mask.
203* Displays the NCP IP address.
204* Displays the second NCP IP address.
(continued)