3Com SUPERSTACK 3 WEBCACHE 3000, User Manual

Page: 257 / 362

Displaying and Changing WAN and LAN Port Information 257
To configure the WAN and LAN port settings:
1 At the Top-level menu, enter:
physicalInterface portMode
The following prompt is displayed:
Warning: Changing the port configuration may cause loss of
any existing network connections to the Webcache.
Do you wish to continue (yes/no) [no]:
2 Enter
yes
if you wish to proceed, or
no
if you want to stop the
configuration.
If you enter
yes
, the following prompt is displayed:
Select Ethernet port (LAN/WAN) [LAN]:
3 Enter either
LAN
if you want to configure the LAN port, or
WAN
if you want
to configure the WAN port.
The following prompt is displayed:
Set autonegotiation (enable/disable) [enable]:
4 Enter either
enable
if you want to enable autonegotiation on the port, or
disable
if you want to disable it.
If you enter
disable
, the following prompt is displayed:
Set link (10half, 10full, 100half, 100full) [100full]:
Enter the Link Speed (10 or 100) and Duplex State (half or full) setting for
the port.
Displaying WAN and
LAN Port Summary
Information
You can use the
summary
command on the PhysicalInterface menu to
view summary information for the WAN and LAN ports.
To display the WAN and LAN information:
1 At the Top-level menu, enter:
physicalInterface summary
The summary information for the WAN and LAN ports is displayed.
dua1611-5aaa04.book Page 257 Friday, November 29, 2002 8:56 PM