3Com SUPERSTACK 3 WEBCACHE 3000, User Manual

Page: 112 / 362

112 C
HAPTER
6: C
ONFIGURING
D
EPLOYMENT
M
ODES
Configuring
Transparent Cache
Mode
To configure Transparent Cache mode using the Web interface:
1 Log in to the Web interface.
2 Click Caching on the Toolbar.
3 Select Set Caching Mode . The Set the Webcache Deployment Mode
screen is displayed.
4 Ensure that Enable Transparent Mode is checked.
5 In the Transparent/Inline Mode Ports field, enter a comma-separated list
of all the ports that the Webcache will listen on.
For further information, see “Transparent Cache Deployment” on
page 36 .
Configuring WCCP
V1
To configure WCCP V1 using the Web interface of the Webcache:
1 Log in to the Web interface.
2 Click Caching on the Toolbar.
3 Select Set Caching Mode . The Set the Webcache Deployment Mode
screen is displayed.
4 Ensure that Enable Transparent Mode is checked and click OK to save this
information.
5 Select WCCP Setup in the Navigation Tree. The WCCP Setup wizard is
displayed.
6 Check Enable WCCP .
7 Select WCCP V1.0 .
8 Enter the IP address of the Cisco router that will redirect traffic to the
Webcache in the
Router IP Address field and click Next .
9 The Finish screen is displayed. Carefully read the summary information,
which displays the WCCP version and Router IP Address that you have
selected. Click
Finish .
You should repeat this configuration process for each additional
Webcache that you want the Cisco router to operate with.
dua1611-5aaa04.book Page 112 Friday, November 29, 2002 8:56 PM