3Com SUPERSTACK 3 WEBCACHE 3000, User Manual

Page: 209 / 362

Email Notification 209
3Com recommends that you use the domain name of the Webcache as
the email address. If you have entered “webcache” as the host name and
“mycompany.com” as the DNS domain name of the Webcache, then you
would enter “webcache@mycompany.com” as the email address.
7 In the To Addresses to Receive Notifications field, enter the addresses of
all the email accounts that will receive the email notifications. Ensure that
you separate each address with a comma. You can enter up to 255
characters in this field.
8 Check Enable SMTP Authentication if you want to enable SMTP
Authentication for Email Notification.
9 In the SMTP Username field, you must enter the SMTP username that is
required by the SMTP server.
10 In the SMTP Password field, you must enter the SMTP authentication
string that is required by the SMTP server.
11 In the Realm/Domain Name field, you can enter the Unix realm or
Windows domain that the SMTP user belongs to, or leave the field blank.
For further information about how SMTP Authentication operates on the
Webcache, see
“SMTP Authentication” on page 210 .
12 You can configure the Webcache to send an email notification when
certain system events occur by checking the relevant boxes:
■
Webcache Software Upgrade Events
This includes the following events:
■
A new software upgrade is available.
This email notification will only be sent if you have enabled automatic
software upgrade detection on the Webcache. You can do this using the
Upgrade Detection screen; for further information,
“Detecting a
Software Upgrade” on page 241 .
■
The Webcache has failed to download the new software upgrade.
■
A software upgrade has succeeded.
■
A software upgrade has failed.
■
Webcache System Failure Events
This includes the following events:
■
A cache storage device has failed.
■
Content Preload Events
This includes the following events:
dua1611-5aaa04.book Page 209 Friday, November 29, 2002 8:56 PM