22
C
HAPTER
2: I
NSTALLING
THE
S
WITCH
Figure 5
Fitting a bracket for rack-mounting
3
Insert the two screws and tighten with a suitable screwdriver.
You must use the screws supplied with the mounting brackets. Damage
caused to the unit by using incorrect screws invalidates your warranty.
4
Repeat steps 2 and 3 for the other side of the Switch.
5
Insert the Switch into the 19-inch rack and secure with suitable screws
(not provided). Ensure that ventilation holes are not obstructed.
6
Connect network cabling.
7
Finally place a unit information label on the unit in an easily accessible
position. The unit information label shows the following:
■
The 3Com product name of the Switch
■
The 3Com 3C number of the Switch
■
The unique MAC address (Ethernet address) of the Switch
■
The serial number of the Switch
You may need this information for fault reporting purposes.
DUA1750-0AAA01.book Page 22 Friday, December 5, 2003 10:24 AM
Summary of Contents for SUPERSTACK 3 3226
