Default Settings
17
Default Settings
Table 5 shows the default settings for the Switch:
Table 5
Default Settings
If you initialize a Switch unit by selecting
System > Control > Initialize
in
the Web interface or by entering
system control initialize
in
the Command Line Interface, the following settings are retained to allow
you to connect to and manage the Switch:
■
IP Address
■
Subnet Mask
■
Default Gateway
Feature
Switch
IP Configuration
Automatic by DHCP client
Port Status
Enabled
Port Speed
All ports are auto-negotiated
Duplex Mode
All ports are auto-negotiated
Flow Control
■
Disabled in half duplex 10/100 ports
■
Auto-negotiated in full duplex 10/100 ports
■
Disabled for 10/100/1000 ports
Broadcast Storm Control
Enabled
Virtual LANs (VLANs)
All ports belong to the untagged Default VLAN
(VLAN 1) with IEEE Std 802.1Q-1998 learning
operational
Link Aggregation Control
Protocol (LACP)
Disabled per port
Multicast Filtering
IGMP Filtering enabled
Rapid Spanning Tree Protocol
Enabled
Spanning Tree Fast Start
■
Enabled on 10/100 ports
■
Disabled on 10/100/1000 ports
Traffic Prioritization
All ports prioritize NBX VoIP traffic (LAN and IP).
All ports set to “best effort” for all other traffic.
Port Security
Disabled per port
DUA1750-0AAA01.book Page 17 Friday, December 5, 2003 10:24 AM
Summary of Contents for SUPERSTACK 3 3226
