1-42
LED
Description
FAIL
z
ON: The fans are faulty or out of position.
z
OFF: The fans operate normally.
z
LPU status LEDs (SLOT0 through SLOT11)
SLOT0 through SLOT11: The LEDs indicate the status of the LPUs seated in the twelve slots.
Table 1-75
Description of the LPU status LEDs
LED
Description
RUN
z
ON/OFF: The LPU is faulty or out of position.
z
Blinking: The LPU is operating normally.
ALM
z
OFF: The LPU is operational or out of position.
z
ON: The LPU is faulty.
If the RUN LED flashes at a high frequency, the card is in the startup process, but is not yet operational.
At system startup, the ALM LED will be ON for a while, but it does not mean that the card is faulty.
z
ACTIVE LED
The ACTIVE LED shows the active/standby status of the LSQ1SR12GB0. If the ACTIVE LED is ON, the
LSQ1SR12GB0 is active; if OFF, the LSQ1SR12GB0 is standby.
RESET button
A reset button is provided on the LSQ1SR12GB0 for you to reset the card when necessary.
LPUs
LSQ1FP48SA0
Introduction
The LSQ1FP48SA0 provides forty-eight 100Base-FX-SFP ports.
Table 1-76
Technical specifications of the LSQ1FP48SA0
Item
Specifications
CPU
MIPS64, 400 MHz
Boot ROM
512 KB
DDR SDRAM
512 MB
Dimensions (H x W x D)
40 × 377 × 355 mm (1.57 × 14.84 × 13.98 in.)
Power consumption
34W to 85 W
Connector type
LC
Number of ports
48
