1-18
Item
Specifications
Interfaces
z
One compact flash (CF) card interface
z
One console port, used for local or remote configuration
and management of the switch through a dialup
configuration
z
One 10/100Base-TX management Ethernet port
Power consumption
10 W to 15 W
The dimensions of the S7900E series are expressed in the form of H × W × D, where
H: Height of the front panel of the card.
W: Width of the part inserted into the chassis, instead of that of the front panel.
D: Depth from the front panel to the other end, excluding the length of the handle.
Panel and LEDs
Figure 1-17
shows the front panel of the LSQ1MPUA0.
Figure 1-17
Front panel of the LSQ1MPUA0
(1) CF card interface and CFS LED
(2) Console port
(3) 10/100Base-TX Ethernet port for management and LEDs
(4) Power and fan tray status LEDs
(5) LPU status LEDs
(6) ACTIVE LED of LSQ1MPUA0
(7) RESET button
On-board interfaces
z
CF card slot
The CF card slot can accommodate a standard CF card (Type I or Type II), where you can store host
software and logs, and thus upgrade software conveniently. The CF card is hot swappable.
Table 1-16
describes the CFS LED on the right of the CF card.
Table 1-16
Description of the CFS LED
Status
Description
OFF
No CF card is in position.
ON
The CF card is in position.
