1-36
Item
Specifications
DDR SDRAM
512 MB
Dimensions (H x W x D)
45 × 377 × 355 mm (1.77 × 14.84 × 13.98 in.)
Interfaces
z
One CF card slot
z
One console port, used for local or remote configuration
and management of the switch through a dialup
connection
z
One 10/100Base-TX management Ethernet port
Power consumption
50 W to 60 W
Panel and LEDs
Figure 1-22
shows the front panel of the LSQ1SRPD0.
Figure 1-22
Front panel of the LSQ1SRPD0
(1) CF card slot and CF card status LED
(2) Console port
(3) 10/100Base-TX management Ethernet port and LEDs
(4)Power module and fan status LEDs
(5) LPU status LEDs
(6) ACTIVE LED of LSQ1SRPD0
(7) RESET button
On-board interfaces
z
CF card slot
The CF card slot can accommodate a standard CF card (Type I or Type II), where you can store host
software and logs and thus upgrade software conveniently. The CF card is hot swappable.
z
Console port
Using an RJ-45 connector, the console port can be connected through a regular asynchronous serial
cable directly to a computer for system debugging, configuration, maintenance, management, and host
software loading, or to a modem for remote system debugging, configuration, maintenance and
management.
Table 1-60
Specifications of the console port
Item
Specifications
Connector type
RJ-45
Number of connectors
1
Interface standard
Asynchronous EIA/TIA-232
Baud rate
115,200 bps (defaulting to 9,600 bps)
Transmission distance
15 m (49.21 ft.)
Functions
z
It can be connected to an ASCII terminal.
z
It can be connected to a serial port of a local or remote (through
a pair of modems) PC running terminal emulation program.
