52
C
HAPTER
5: R
OUTER
C
ONFIGURATION
8
If you want your Router to automatically disconnect from the Internet
automatically after a period of inactivity, specify a time in the
Idle Time
(Minutes)
field.
Enter a value of 0 to disable this timeout.
9
Enter the
MTU
value supplied by your ISP. If you do not know this, leave it
at the default value.
10
Click
Apply
.
PPPoA
Figure 39
PPPoA Settings Screen
1
Enter the User Name assigned to you by your ISP in the
User Name
field.
2
Enter the Password assigned to you by your ISP in the
Password
field.
Re-enter your password in the
Retype Password
field.
3
If your ISP assigns your IP address dynamically then select
Yes
in the
IP
assigned by ISP
field and proceed to step 4.
If your ISP has assigned you a fixed or static IP address, select
No
in the
IP
assigned by ISP
field.
Then enter the IP address and Subnet Mask information provided by your
ISP into the
IP address
and
Subnet Mask
fields.
4
Enter the VPI and VCI parameters provided to you by your ISP in the
VPI
and
VCI
fields.
5
Select the encapsulation type (LLC or VC MUX) in the
Encapsulation Type
field. This information is provided to you by your ISP.
Summary of Contents for OfficeConnect 3CRWDR100B-72
