Internet Settings
51
PPPoE
Figure 38
PPPoE Settings Screen
1
Enter the
User Name
assigned to you by your ISP in the
User Name
field.
2
Enter the Password assigned to you by your ISP in the
Password
field.
Re-enter your password in the
Retype Password
field.
3
Enter your PPP over Ethernet service name in the
Service Name
text box.
Not all ISPs require a service name. Only enter a service name if your ISP
requires it.
4
If your ISP assigns your IP address dynamically then select
Yes
in the
IP
assigned by ISP
field and proceed to step 5.
If your ISP has assigned you a fixed or static IP address, select
No
in the
IP
assigned by ISP
field.
Then enter the IP address and Subnet Mask information provided by your
ISP into the
IP address
and
Subnet Mask
fields.
5
Enter the VPI and VCI parameters provided to you by your ISP in the
VPI
and
VCI
fields.
6
Select the encapsulation type (LLC or VC MUX) in the
Encapsulation Type
field. This information will have been provided to you by your ISP.
7
If you want your Router to connect to the Internet every time a PC needs
to access it, check the
Dial on Demand
checkbox. If this box is not
checked, then you will have to manually connect and disconnect using
the buttons on the Status Screen (see
page 39
).
Summary of Contents for OfficeConnect 3CRWDR100B-72
