3Com NETBuilder II, Installing Instruction, Page: 9 / 82

A
BOUT
T
HIS
G
UIDE
This guide dexcribes how to install and maintain the NETBuilder II
®
bridge/router. This system is available as a 4-Slot, 8-Slot, or 8-Slot Extended
chassis.
Audience Description
This guide is written for network equipment installers or network managers
responsible for installing and using network hardware and managing the
attached networks. It assumes a working knowledge of network operations, but
does not assume prior knowledge of 3Com
® internetworking equipment.
Each optional I/O module has a separate installation guide that provides
installation, cabling, maintenance, and troubleshooting information.
If the information in the release notes shipped with your product differs from
the information in this guide, follow the release notes.
Conventions
Table 1 describes notice icons that are used throughout this guide.
Table 1 Notice Icons
Icon Notice Type Alerts you to...
Information note Important features or instructions
Caution Risk of personal safety, system damage, or loss of data
Warning Risk of severe personal injury