manualshive.com logo in svg

3Com NETBuilder II, Installing Instruction, Page: 47 / 82

Share
Download
3Com NETBuilder II Installing Instruction Download Page 47

3

NETB

UILDER

 II 8-S

LOT

 E

XTENDED

 

B

RIDGE

/R

OUTER

The NETBuilder II bridge/router is a powerful, modular system designed to 
handle a large variety of LAN and WAN networks. I/O modules plug easily into 
the chassis and provide expandability and compatibility for your WANs 
and LANs.

The Extended chassis holds up to eight regular- or extended-format modules

The NETBuilder II Extended bridge/router is available as an EZBuilt system with 
the main processor and software preinstalled, or separately as a base chassis.

EZBuilt System

Your system consists of a chassis, the main processor (either the Dual Processor 
Engine (DPE) module or the Communications Engine Card (CEC) 20 module), 
and the software preloaded on an installed PC flash memory card.

■

The NETBuilder II chassis with a CEC 20 module has the flash memory card 
installed in the internal flash memory drive. The chassis also has a floppy disk 
drive.

■

The NETBuilder II chassis with a DPE module has the flash memory card 
installed in flash memory drive A on the DPE module. The DPE module does 
not support a floppy disk drive.

Installing the 
Extended Chassis 

The following sections describe how to install your NETBuilder II Extended 
chassis.

Unpacking Your Chassis

After you have removed your chassis from the carton, verify that you have 
received all of the following items:

■

Chassis — The EZBuilt system has the main processor module and software 
already installed.

■

Accessory box containing the following items:

■

Documentation binder and guides

■

Power cord

■

Rack-mount brackets and hardware

■

Cable strain-relief brackets 

■

Software package (EZBuilt system only)

If you do not have all of these items, contact your network supplier.

If any of the items are damaged, contact the shipping company to file a report. 
If you need to return the chassis to your network supplier, ship it in the original 
carton and antistatic shielded bag. If the original carton was damaged in 
shipment, repack the system in a carton that provides equivalent protection.

Summary of Contents for NETBuilder II



















































































Reviews:

No comments