3Com IntelliJack NJ200, User Manual, Page: 8 / 58

4 C
HAPTER
1: I
NSTALLING THE
NJ200 N
ETWORK
J
ACK
• Male to male RJ-45 coupler cable (1 per Network Jack) for connecting the
Ethernet cable from the network to the Network Jack (required only if your
network cable is terminated with a female RJ-45 connector).
Additionally, the following items are shipped with the single pack:
• Compact disc with User Guide and Configuration Manager software.
• Adapter plates for installing connectors to use as pass-through ports. The
adapter plates accommodate connectors from suppliers including:
n
Panduit (RJ-45 and RJ-11)
n
Avaya (RJ-45 and RJ-11)
• Adapter plate screws (2) for mounting the adapter plate to the Network Jack.
Obtaining Optional
Components
The Network Jack works with the following optional components, all of which are
available from 3Com. Order online at www.3com.com or by calling
1-877-949-3266.
NOTE: The connectors for the adapter plates must be purchased from the
manufacturer. For a list of supported connectors, go to www.3com.com/.
Component Purpose 3C Number(s)
Adapter plates For installing pass-through port connectors of
your choice that allow a direct connection to
another network segment or for connecting an
analog or digital PBX telephone. 3CNJAP-PA-20
3CNJAP-AV-20
Extension ring For ensuring that the Network Jack is properly
mounted to a cubicle; required if the cubicle
opening:
n
Has a depth of fewer than 1.5 inches.
n
Does not support the NEMA-WD6 standard.
n
Does not have pre-drilled screw holes for
standard mounting.
3CNJEXTRING
Single-port Ethernet
power supply For providing Power Over Ethernet to locally
power a single Network Jack. 3CNJPSE
Multi-port Ethernet
power supply For providing Power Over Ethernet to power up
to 24 Network Jacks. 3CNJPSE24
3C10220
3C10222
Local power supply For locally powering a single Network Jack;
required if your network does not support Power
Over Ethernet. 3CNJPSL
VoIP telephone
power cable For powering a VoIP telephone on a network
that uses Capacitive Power Discovery
Process-compatible Power Over Ethernet. Check the
3Com web site