3Com IntelliJack NJ200, User Manual, Page: 27 / 58

Setting Advanced Options 23
1 Select the Advanced tab on the NJ200 Local Configuration Manager window.
2 To change the Network Jack’s configuration password, click on the box next to
Change NJ Password. Then enter the new password in both password fields. (You
must enter the password twice to ensure you entered it correctly.) The password
you select can be any combination of letters and numbers between 8 and 32
characters.
3 To configure the NJ200 for management with an SNMP console, select the SNMP
Configuration box. Enter the GET Community String and SET Community String in
the appropriate fields. Each field lets you enter any combination of letters and
numbers up to 32 characters.
4 Click the Configure button and the Local Configuration Manager will ask you to
enter the password for the device. If you haven’t changed the password, you
should enter the default password, which is “
password ” (without the quotes).
Your changes are sent to the NJ200 and will become effective immediately.
NOTE: You should change the password to ensure that no one else can
re-configure your system. Make sure you remember the new password you set.
If you forget the new password, you will not be able to perform any
other configuration tasks unless you send the device back to 3Com
.