7-23
Do not touch the surface-mounted components of the memory module directly with your hands. Hold
the memory module only by its non-conductive edge. Because a memory module is vulnerable to ESD,
improper operation may damage it.
Installing and Removing an Air Filter
An air filter is an optional accessory.
Function of an Air Filter
Installed at the left air intake of the device, an air filter prevents dust from entering the chassis.
Installing an Air Filter
Follow these steps to install an air filter:
Step1
Face the left side of the chassis, where the air filter is to be installed.
Step2
Position the upper slide rail horizontally near the top of the left side of the chassis, as shown in Figure
7-37. Align the screw holes on the slide rail with those on the chassis.
Step3
Fasten the fastening screws one by one by turning them clockwise with a Philips screwdriver.
Step4
Position the lower slide rail horizontally near the bottom of the left side of the chassis, as shown in
Figure 7-38. Align the screw holes on the slide rail with those on the chassis.
Step5
Fasten the fastening screws one by one by turning them clockwise with a Philips screwdriver.
