Using the 3Com DOS Diagnostics Program
75
Running the Group 1 Tests
The Group 1 tests check the integrity of the on-board ASIC
circuitry. The types of tests and number of test repetitions
are set to the default values (that is, Group 1 tests enabled,
other tests disabled).
To run all the internal tests:
1 Physically disconnect the NIC from the network.
2 From the
Select
menu item on the main screen,
select the NIC to be tested.
3 From the
Test
menu, select
Test Setup
.
4 In the Test Setup screen:
a
Verify that the Group 1 tests are selected.
b
Verify that all the internal tests are enabled.
If they are not, select
Enable Group
to set all internal
tests to Enable.
You can enable and disable an individual test by selecting
the test and pressing the spacebar.
c
Verify that the Group 2 and Group 3 tests are disabled.
If the Group 2 tests are not disabled, select
Group 2
,
and click
Disable Group
.
If the Group 3 tests are not disabled, select
Group 3
,
and click
Disable Group
.
d
Enter the number of times you want the tests to run, or
select
Continuous
.
5 Select
OK.
The main screen reappears.
6 From the
Test
menu, select
Run Tests
.
The Test Results screen appears.
7 Select
Start
to run the Group 1 tests.
The tests results are updated on the screen as the tests run.
Book Page 75 Monday, June 7, 1999 2:14 PM
